A small elevator on the fifth floorLifting table hydraulic pressureconsumption

Application and characteristics of stage lift: stage lift is also called lifting stage. The stage lift is specially installed on the stage for lifting and rotating the stage. It has a variety of functions such as lifting， rotating and tilting， and adopts self-locking， interlock， travel switch， mechanical limit，Guideway elevator hydraulic explosion-proof and other protective measures.

2The load of goods and the tonnage of goods transported at one time also affect the speed of lifting and lowering. Achieving the excellent value of goods transported by the lifting platform is the guarantee of speed. If the goods are too heavy，Small elevators for elevatorsLarge hydraulic lifting platformWhat is the purpose it will affect the speed. If the goods are too light， it will also affect the normal delivery time.

gA small elevator on the fifth floorThis fixed lifting equipment can also be used in the warehouse. For example， a certain floor in the warehouse needs to be lifted to send goods or personnel to the designated warehouse location.

The load of goods and the tonnage of goods transported at one time also affect the speed of lifting and lowering. Achieving the excellent value of goods transported by the lifting platform is the guarantee of speed. If the goods are too heavy， it will affect the speed. If the goods are too light， it will also affect the normal delivery time.

SKalushiDrain the hydraulic oil of the hydraulic elevator and discard it. For the outdoor guide rail elevator， tighten the connector and take out the oil filter. After cleaning， and then put it back into the oil tank and connect the pipeline.

WiThe lifting platform has been inspected and debugged before leaving the factory， and all technical indicators meet the design requirements. Only the power supply needs to be connected when using， and the hydraulic and electrical systems basically do not need to be adjusted.

Pay attention to placing the elevator on a solid and flat ground during use to prevent it from tipping over during operation. Press“ Up” Or“ Down” Push the button to make the worktable lift. Always check and maintain all parts of the lift. If the worktable does not move，Guideway elevator stop the machine immediately for inspection. If the working pressure of the electric hoist is too high or the sound is abnormal， it should be shut down immediately for inspection to avoid serious damage to the machinery; Check the working condition of the axle pin regularly every month. If the axle pin and screw are loose， they must be locked to prevent accidents caused by the axle pin falling off.

The safety belt needs to be checked every six months. The load is kg and the test time is five minutes. After the test， and make a record of the test. The unqualified safety belt should be stopped immediately.

qWhen using the hydraulic lifting platform， it is also necessary to check whether there is overheating， because the equipment is equipped with a motor. If the motor is overheated， it may cause damage to the motor， and it is expensive to replace a motor. Therefore in the process of driving or test run， if the motor is overheated， it should be stopped immediately，Guideway elevator and then check and eliminate the fault that causes the motor to overheat， Then you can continue to use the machine.

EThe motor is the core part of the hydraulic lifting platform，Small elevators for elevatorsLarge hydraulic lifting platformWhat is the purpose and the maintenance of the motor is undoubtedly equivalent to half the service life of the hydraulic lifting platform， so how to properly maintain the motor of the hydraulic lifting platform? Lets share it with users today!

Bquality indexThe hook of the safety belt shall not be hung on unstable or moving objects.

lQWhen personnel enter the lift table for maintenance， the lift must be hoisted to prevent casualties caused by the sudden fall of the lift table.

The heavy operating rod mechanism of the operating rod has defects. Check， adjust and replace unqualified parts; Clean the valve; Check the clamping of the hydraulic oil cleanliness valve core (manufacturing， installation and dirt problems)

The routine maintenance of guideway lifting equipment should pay attention to regular inspection and maintenance， eliminate hidden dangers and eliminate faults， which are good for improving work efficiency， extending the service life of the equipment and ensuring the safety performance of the elevator.

Credit guaranteedGuide rail cargo elevator is a kind of equipment for transporting heavy objects up and down. It has a very good application in factories，Scissor lift_ Hydraulic lifting table_ Guide rail lift - scissor lift manufacturer workshops and other places. For this kind of lifting machinery， its daily maintenance and maintenance are very important， because if you do not pay attention to some small details， so you should pay attention to the daily maintenance of the cargo elevator.

CEnsure that the workplace is clean. For example， when dismantling the oil pipe of the hydraulic lifting platform and replacing the oil pipe joint， the oil pipe joint should be replaced immediately. Do not expose the oil pipe joint for a long time. Prevent dust and other magazines from entering the oil pipeline of the hydraulic lifting platform from the oil pipe joint. If there is an urgent matter that cannot be replaced in time， wrap the oil pipe joint with a clean sealing bag or wrapping film to avoid the entry of dirt.

The multi-pillar aluminum alloy lifting platform is widely used in the cleaning and circuit maintenance of the top floor of the airport high-speed railway station， shopping mall， star hotel and other halls， with high elevation， low dead weight， flexible movement and simple design.

gA small elevator on the fifth floorThe power unit adjustment， whether it is a scissor-type lifting platform or a guide-type lifting cargo elevator， is made up of the power unit and the oil cylinder. The power unit is equipped with four outlets during production， which can be adjusted to increase or decrease the hydraulic oil flow of the oil cylinder. We can adjust the hydraulic oil flow by adjusting the speed of the motor or the electro-hydraulic proportional valve; What factors will affect the lifting speed of the hydraulic lift oil pipe? The longer the hydraulic oil pipe is， the longer the lifting time will be. Therefore， during installation， the length of tubing shall be minimized within the allowable range of design; The size of the oil pipeline can also be adjusted on the basis of the adjustment of the power unit， and the corresponding adjustment can be made on the premise that the equipment meets the normal demand and safety.

rAHow to maintain the elevator in winter is also the primary reason. Many workers in other industries do not know that the hydraulic oil for hydraulic elevators is also used in different types in summer and winter. Often at low temperatures， the hydraulic oil used in summer will become viscous or even freeze. After entering the low temperature in winter， be sure to replace the hydraulic oil containing antifreeze in winter， which is suitable for operation at low temperature.

The price of the elevator is too early to open the package. We should not open the package in advance before installing the elevator bearing. This will simply lead to premature pollution of the bearing， which will lead to premature damage of the bearing. In addition， we should ensure that the device environment is clean when installing， and do not bring iron filings， and other things into the bearing because even some small dust， If it goes on for a long time， it will also affect the running-in between the bearings， resulting in a decline in the life of the elevator.